O to co mam przez wpisanie "smartctl -a /dev/sda" trochę długa lista ;)
smartctl version 5.38 [i686-pc-linux-gnu] Copyright ? 2002-8 Bruce Allen
Home page is [url="http://smartmontools.sourceforge.net/"]http://smartmontools.sourceforge.net/[/url]
=== START OF INFORMATION SECTION ===
Device Model: TOSHIBA MK2555GSX
Serial Number: 88GT4702T
Firmware Version: FG001M
User Capacity: 250,059,350,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Thu Apr 29 19:54:16 2010 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 96) minutes.
SCT capabilities: (0x0039) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 656
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 769
5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 426
7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 683
10 Spin_Retry_Count 0x0033 115 100 030 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 751
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 113
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 423
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 8612
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 28 (Lifetime Min/Max 17/47)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 224
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 69
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
220 Disk_Shift 0x0002 100 100 000 Old_age Always - 100
222 Loaded_Hours 0x0032 100 100 000 Old_age Always - 371
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
226 Load-in_Time 0x0026 100 100 000 Old_age Always - 277
240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
SMART Error Log Version: 1
ATA Error Count: 1477 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1477 occurred at disk power-on lifetime: 681 hours (28 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 02 16 2b 38 60
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 00 0f 2b 38 40 08 01:03:13.200 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 01:03:13.200 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 01:03:13.200 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 01:03:13.199 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 01:03:13.199 READ NATIVE MAX ADDRESS EXT
Error 1476 occurred at disk power-on lifetime: 681 hours (28 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 02 16 2b 38 60
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 00 0f 2b 38 40 08 01:03:09.367 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 01:03:09.367 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 01:03:09.366 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 01:03:09.366 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 01:03:09.366 READ NATIVE MAX ADDRESS EXT
Error 1475 occurred at disk power-on lifetime: 681 hours (28 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 02 16 2b 38 60
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 00 0f 2b 38 40 08 01:03:05.523 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 01:03:05.523 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 01:03:05.522 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 01:03:05.522 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 01:03:05.522 READ NATIVE MAX ADDRESS EXT
Error 1474 occurred at disk power-on lifetime: 681 hours (28 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 02 16 2b 38 60
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 00 0f 2b 38 40 08 01:03:01.688 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 01:03:01.688 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 01:03:01.688 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 01:03:01.688 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 01:03:01.687 READ NATIVE MAX ADDRESS EXT
Error 1473 occurred at disk power-on lifetime: 681 hours (28 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 02 16 2b 38 60
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 00 0f 2b 38 40 08 01:02:57.855 READ FPDMA QUEUED
27 00 00 00 00 00 e0 00 01:02:57.855 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 01:02:57.854 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 01:02:57.854 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 01:02:57.854 READ NATIVE MAX ADDRESS EXT
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
A i jeszcze chciałbym dodać, to to że jak uruchomię ubuntu, to samym początku, pisze mój akumulator jest za stary albo za słaby, bo jego Pojemność: 47,1% :/
A tak w ogóle - jaka jest norma bad sectorów ?